Description
48" Showerline Drain Pan Sloping Kit | Curbed Tiled Shower
This 48" Showerline Drain Pan Sloping Kit is for a Curbed Tile Shower and is made of pre-sloped extruded rigid PET* plastic foam. Strong yet lightweight, non-reactive, economical, and shatterproof.
This Showerline Drain Pan Sloping Kit is chemically stable, UV resistant, and suitable for both interior and exterior use. It can be used with both sheet and liquid topical waterproofing.
For Curbless Showers 28 - 64" Long x 40 - 48" Deep.
LONGER than 64 Inches? CLICK HERE
Features:
-
Speed and consistency of installation
-
Eliminates the need for traditional mud bed installations
-
Lightweight, durable with high compressive strength 145PSI
-
Interlocking design, can be quickly and easily modified to size and shape of on site conditions
-
Meets IAPMO PS-106-2013
-
100% post Consumer recycled and fully recyclable.
Uses:
-
Interior and exterior use
-
Industrial, commercial and residential showers
-
Gang showers
-
Pet Showers Suitable Substrates ( Interior Only)
-
Concrete
-
Exterior Glue Plywood
-
Cement backer board Consult cement backer board manufacturer for specific installation recommendations.
-
OSB Or Avantech
48" Showerline Drain Pan Sloping Kit | Curbed Tiled Shower
Showerline Drain Planning Guide
ShowerLine Pan Kit Includes:
-
Drain Support Frame
-
Quick Slope (SLQS1652**, SLQS852***)
-
Curb (SL Curb)
-
Screws (5)
*DEF. PET (polyethylene terephthalate)
Uses:
-
Interior and exterior use
-
Industrial, commercial and residential showers
-
Gang showers
*WE PAY SHIPPING!
TYPICALLY SHIPS IN TWO BUSINESS DAYS | When ordered on Standard Business Days (M-F) before 12PM EST.
Need it FAST? Expedited Shipping Options are Available at Check-out.
FedEx Service Maps and charts are a general representations of transit, and not a guarantee of delivery time.
Please Call 877.392.2531 for shipping availability and cost to ship to locations outside of the Contiguous USA.
Specification Sheets
Shipping Info
Warranty Information
LIFETIME WARRANTY
QuickDrain USA low-profile linear shower drains are intended for use with tile showers. Both the shower drains and the liner must be installed in accordance with the manufacturer’s published instructions and the applicable codes. Ceramic tile must comply with ANSI A137.1. Underlayment must comply with the applicable code or ANSI A118.10. Our drains are in compliance with the 2009 International Residential Code, the International Plumbing Code and the Uniform Plumbing Code. When installed in accordance with our specifications and in conjunction with local building codes, our drains carry a lifetime guarantee and warranty. Any defective drain that has been properly installed will be replaced at no charge. There is no warranty on installation.
Reviews
Have a question?
We're here to help.
