Accessibility Resources

Spitfire Scout Mobility Scooter Error Codes | EZ Able®

Posted by Reviewed by EZ Able Customer Support on Sep 24, 2023

✓ Troubleshooting Guide

Spitfire Scout Mobility Scooter Error Codes

Use this quick reference guide to identify common flash codes on the Spitfire Scout mobility scooter and review possible causes and recommended next steps.

Need technical help? Consumers can contact Drive Medical’s Technical Department for additional troubleshooting support at (866) 694-5085.

Flash Code Troubleshooting Chart

Review the flash code shown on the scooter and match it with the possible cause and suggested solution below.

Flash Code Possible Cause Suggested Solution
1 The battery needs charging or there is a bad connection to the battery. Check the connections to the battery. If the connections are good, try charging the battery.
2 There is a bad connection to the motor. Check all connections between the motor and the controller.
3 The motor has a short circuit to a battery connection. Test the motor.
4 Not used No action listed.
5 Not used No action listed.
6 The controller is being inhibited from driving. Check the battery charger connector. Disconnect the battery charger.
7 A throttle control fault. Make sure the throttle control is in the at-rest position before switching on the Spitfire. Adjust if needed.
8 A controller fault is indicated. Make sure all connections are secure.
9 The electromagnetic brake has a bad connection. Check the electromagnetic brake and motor connections. Make sure the controller connections are secure.
10 Excess voltage has been applied to the controller. Check the battery connections. This is usually caused by a poor battery connection.

Spitfire Scout

Spitfire Scout mobility scooter

Click the image to view a larger version. Keep this chart nearby for quick reference when diagnosing flash codes.

Still Stuck? We Can Help.

Call Drive Medical technical support at (866) 694-5085, or contact EZ Able® and we will point you in the right direction.

About the author

Jody Fisk, President & Founder of EZ Able®

Jody Fisk is a licensed residential builder and accessibility specialist. Licensed in Michigan since 1991 and working in construction before that, Jody has spent decades helping people build and modify homes that are easier and safer to live in.

  • President & Founder of EZ Able® (since 2008)
  • Licensed Residential Builder, State of Michigan, since 1991
  • 35 years of experience in construction
  • Honors Scholar, B.A. Economics, University of Michigan

Jody specializes in helping homeowners, contractors, and caregivers choose the right accessibility solutions, from walk-in and curbless showers to full aging-in-place home modifications. EZ Able®’s work focuses on improving safety, independence, and long-term usability in everyday living environments.

Need Help Finding the Right Accessibility Solution?

EZ Able® offers trusted products and expert support for safer, more accessible living.